您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。
產品未必與您的搜尋完全相符
您先前購買過這項產品。
檢視歷史記錄
FQM-100-M
Fibre Optic Tester, SC Adapter, Fiber QuickMap
產品訊息
技術文件 (2)
CAD 下載
--請選擇...
✔
--請選擇...
×
條款與條件
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
產品總覽
Fibre QuickMap™ kit with multimode fibre distance and fault locator unit. It works on multimode fibre, 50/125µm and 62.5/125µm and 850nm output wavelength. Measure up to 4,921feet (1,500metres) of fibre in seconds. Locate severe bends, high-loss splices, breaks and dirty connectors in multimode fibre. Find potential sources of high bit error rates caused by reflectance from dirty or poor connections.
- Measure and locate high-loss splices
- Locate the end of a fibre
- Detects live optical signals before it begins testing
- Quick set-up connect fibre and press the test button
- Find problems quickly 6s test time no more blind troubleshooting that can waste hours
- Change the Index of Refraction (IOR) to improve fibre length accuracy
- Visible in dark areas (backlighted display turns off automatically)
- Removable SC adapter is easily cleaned
- Optional LC, ST and FT interchangeable adapters are available
- 2 AA alkaline batteries (long battery life, 1500 tests (typical))
應用
Test & Measurement
內容
Multimode fibre fault locator unit, Screw on interchangeable SC adapter, 50µm SC/LC multimode launch fibre, Carrying case, 4-language quick reference guide (manuals in 9 languages available on-line), Safety instruction manual, Batteries.
篩選工具