您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。

產品未必與您的搜尋完全相符

您先前購買過這項產品。 檢視歷史記錄

 
 

2CPSA1A1

Grabwire Switch, 152 m, DPST-NO, DPST-NC, 120 V, 6 mA, 24 V, 2.8 A

2CPSA1A1 - Grabwire Switch, 152 m, DPST-NO, DPST-NC, 120 V, 6 mA, 24 V, 2.8 A

圖片僅供舉例說明。 請參閱產品描述。

製造商產品編號:
2CPSA1A1
訂購代碼:
2676062
產品範圍
2CPS Series
技術資料表:
2CPSA1A1   Datasheet
查看所有技術文件

產品範圍選擇器 (2CPS Series)

查看此產品系列的全部內容

產品訊息

想要查看類似產品?只要選擇以下所需屬性並按下按鈕即可 ×


:
152m

:
DPST-NO, DPST-NC

:
120V

:
6mA

:
24V

:
2.8A

:
2CPS Series

尋找類似產品 選擇並修改上方屬性,尋找類似的產品。

技術文件 (1)

產品總覽

The 2CPSA1A1 is a four-pole single-throw (4PST-2NO) double-pole single-throw (DPST-NC) 1/2-inch NPT Cable Pull Safety Switch provides a readily accessible emergency stop signal. It is designed to provide emergency stop protection for exposed conveyor and assembly lines. The internal mechanism latches on both slackened cable (push) and pulled cable. This capability also enhances productivity by eliminating nuisance stops due to variations in temperature, stretch of cable over time and other application variables. It is intended for use in very long cable runs of 152m (500ft) or shorter, such as long conveyor lines found in warehouses. A line in the midpoint of the cable tension window indicates proper cable tension, providing easy set-up. The direct opening switch contacts are held closed when the actuating cable is under proper tension and the reset knob is set to RUN. When the actuating cable is pulled, slackened or broken, a cam positively opens the NC switch contacts.
  • Large wiring cavity with straight through wiring
  • Die-cast zinc housing
  • IP67 Protection rating
  • -25 to 80°C Temperature range

應用

Industrial

6 有存貨 需要更多?

6 件可在 1 - 2 個工作日內出貨

NT$13,845.66

不提供定價。 請聯絡客戶服務

價格
每個
多項: 1 最少: 1
數量 價格 您的價格
 
 
1+ NT$13,845.66
促銷價格
合約價格
網路專用價格
網路專用合約價格
 
 
 

不提供定價。 請聯絡客戶服務

No longer stocked:: No Longer Manufactured::
新增至購物車 無現貨,延期交貨 預購
新增
限制的項目
新增零件編號/ 品項附註
總價:
總價: ( )
總價: --

客戶評論

客戶問答交流