TLE493DP2B6A1HTSA1

TLE493DP2B6A1HTSA1 is a high-accuracy low-power 3D hall sensor with an I²C interface. It features programmable flux resolution down to 65µT (typ.), X-Y angular measurement mode. The TLE493D-P2B6 is designed for a wide range of magnetic sensing, including the following gear stick position, control elements in the top column module and multi-function steering wheel, multi-function knobs, and pedal/valve position sensing.

• Component reduction due to 3D magnetic measurement principle
• Platform adaptability due to device configurability
• Very low system power consumption due to wake-up mode resulting in extended battery runtime
• Supply current is 7nA typical, 3D (X, Y, Z) magnetic flux density sensing of ±160mT
• 12-bit data resolution for each measurement direction plus 10-bit temperature sensor
• Variable update frequencies and power modes (configurable during operation)
• Triggering by external µC possible via I²C protocol, AEC qualified
• Interrupt signal to indicate a valid measurement to the microcontroller
• Supply voltage range from 2.8 to 3.5V (supply voltage must be above restart level)
• PG-TSOP6-6-8 package, operating temperature range from -40 to 125°C (Tj = Ta +3K in fast mode)