您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。
產品未必與您的搜尋完全相符
您先前購買過這項產品。
檢視歷史記錄
5609
Prototyping System For Micro:Bit, Includes Edge Connector/Breadboard/Mounting Plate
產品訊息
想要查看類似產品？只要選擇以下所需屬性並按下按鈕即可 ×
- :
- -
- :
- -
- :
- -
- :
- -
- :
- -
- :
- -
- :
- 4x Pan Head M3 Machine Screws, 1x Small Prototype Breadboard, 10x Jumper Wires Male to Male, 10x Jumper Wires Male to Female, 1x Perspex Mounting Plate, 1x Edge Connector Breakout Board for BBC micro:bit, 4x Self-adhesive Rubber Feet
- :
- micro:bit
技術文件 (1)
CAD 下載
--請選擇...
✔
--請選擇...
×
條款與條件
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
產品總覽
This prototyping system for the micro:bit is a good introduction to making circuits and conducting experiments. It also gives access to the pins on the bottom of the micro:bit. The system uses the Edge Connector Breakout Board for micro:bit in conjunction with a small prototype breadboard, making it easy to connect additional components using the included jumper wires.
- No soldering is required
- Breaks out 21 pins from the micro:bit
- Run your own custom code from your BBC micro:bit to interact with external components
註腳
Note: Kit requires assembly
篩選工具