MCP4728T-E/UN

MCP4728T-E/UN is a quad, 12bit voltage output Digital-to-Analog Convertor (DAC) with non-volatile memory (EEPROM) in a 10-lead MSOP package. Its on-board precision output amplifier allows it to achieve rail-to-rail analogue output swing. The DAC input codes, device configuration bits, and I2C address bits are programmable to the non-volatile memory (EEPROM) by using I2C serial interface commands. The non-volatile memory feature enables the DAC device to hold the DAC input codes during power-off time, allowing the DAC outputs to be available immediately after power-up with the saved settings. This feature is very useful when the DAC device is used as a supporting device for other devices in the application’s network.

• Has a high precision internal voltage reference (VREF = 2.048V)
• User can select the internal reference or external reference (VDD) for each channel individually
• ±0.2 least significant bit differential nonlinearity (DNL) (typical)
• Fast settling time of 6 µs (typical)
• Normal or power-down mode
• Low power consumption
• Single-supply operation range from 2.7V to 5.5V
• Includes a power-on reset (POR) circuit
• Two-wire I2C compatible interface for standard (100KHz), fast (400KHz)/ high speed (3.4MHz) mode
• Extended temperature range from -40°C to +125°C