您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。
產品未必與您的搜尋完全相符
您先前購買過這項產品。
檢視歷史記錄
MIKROELEKTRONIKA MIKROE-798
Development Kit, EasyPIC V7, Supports 370+ PIC MCU's in DIP Packaging, mikroProG Programmer
產品訊息
技術文件 (1)
產品總覽
MIKROE-798 is a EasyPIC seventh generation PIC development board with PIC18F45K22 device. It is the new default chip of EasyPIC v7 that provides 16 MIPS operation, 32KB of linear program memory, 1536bytes of linear data memory, and support for a wide range of power supply from 1.8V to 5V. With switching power supply it creates stable voltage and current levels necessary for powering each part of the board. The board contains eight DIP sockets and two DIP18 sockets for PIC MCUs. On board mikroProg is a fast USB 2.0 programmer with mikroICD hardware ICD. FTDI chip allows EasyPIC v7 board to be connected with a PC through USB cable over UART connection. RS232 serial communication is performed through a 9 pin SUB-D connector and the microcontroller UART module. Board is equipped with connectors which allows to connect LCD 2 x 16 display and GLCD 128 x 64 display securely using plastic distancer, specially designed for this purpose.
- Amazing connectivity
- MikroProg on board
- Dual power supply
- Supports click boards
- MikroBUS sockets and USB connection
- PORT headers, PORT buttons and PORT LEDs are next to each other, and grouped together
- 4 digit 7-seg display and Piezo buzzer
- LM35 analog temperature sensor and DS1820 digital temperature sensor
- ADC inputs and I2C EEPROM
- Contains three GND pins located in three different sections of the board
應用
Hobby & Education
內容
Board, USB cable, User manual, DVD.
7 有存貨 需要更多？
×
即日起您可預購補貨 僅需如常訂購所需數量然後結帳即可。目前可發貨的數量會列入補貨預購，供應商一旦到貨，我們便隨即出貨給您。 產品發貨給您時，才向您收費。
將於 2023/12/26 再提供 4 件
下訂即可添購更多存貨 依照供應商前置時間，預計約 2024/1/8
7 英國 有庫存，可在 3-4 個工作日內發貨
由於市場條件的影響，交貨時間僅供一般指導，可能會在短時間內發生變化
篩選工具