MPM3683GQN-7

MPM3683GQN-7 is a 2.7V-16V, 8A, step-down power module. This is an easy-to-use, fully integrated, step-down, DC/DC power module with 8A of continuous current and 10A of peak current. The MPM3683-7 integrates a DC/DC converter, power inductor, and some basic passive components. The MPM3683-7 can deliver output current over a wide input voltage supply range with excellent load and line regulation. The MPM3683-7 uses constant-on-time (COT) control to provide fast transient response and ease loop stabilization. The MPM3683-7 has an internal soft-start (SS) timer of about 1.6ms. This can be increased with an extra SS capacitor placed between TRK/REF and AGND. An open-drain power good signal indicates that the output voltage is within the nominal voltage range. Typical applications include telecom and networking systems, base stations, industrial systems, servers & storage, FPGA & ASIC cards.

• Differential output voltage remote sense
• Low RDS(ON) integrated power MOSFETs, integrated inductor
• Proprietary switching loss reduction technique
• Stable with Zero-ESR output capacitor
• Selectable pulse skip or forced Continuous Conduction Mode (CCM) operation
• Excellent load regulation, output voltage tracking and output voltage discharge
• PG active clamped low level during power failure
• Programmable soft-start time from 1.6ms, pre-bias start-up
• 28 pin QFN package
• Non-latch OCP, UVP, UVLO, thermal shutdown and OVP

附註

MPS part numbers ending in "-P" and "-Z" are the same parts. P & Z only indicates reel size.