您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。

產品未必與您的搜尋完全相符

您先前購買過這項產品。 檢視歷史記錄

 
 

MP004562

RPI4 CASE, WITH HEATSINK KIT, BLACK

MULTICOMP PRO MP004562
MULTICOMP PRO MP004562
MULTICOMP PRO MP004562
MULTICOMP PRO MP004562
×
×

圖片僅供舉例說明。 請參閱產品描述。

製造商產品編號:
MP004562
訂購代碼:
3489264
產品範圍
Pi-Box Pro 4
技術資料表:
MP004562   Datasheet
查看所有技術文件

產品訊息

想要查看類似產品?只要選擇以下所需屬性並按下按鈕即可 ×


:
Raspberry Pi4

:
30mm

:
110mm

:
95mm

:
Aluminium

:
Black

:
Pi-Box Pro 4

尋找類似產品 選擇並修改上方屬性,尋找類似的產品。

技術文件 (2)

CAD 下載

×

條款與條件

CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.

接受 取消

產品總覽

The Pi-Box Pro 4 is a rugged industrial enclosure kit for the Raspberry Pi4. By utilising our Micro HDMI Pi4 extender board we can turn the power and Micro HDMI connectors through 90° so the they are on the same plane as the Ethernet and USB connectors. The rear panel is made from 3mm acrylic and allows for communication via Bluetooth and Wi-Fi signals from the Pi4. The standard version allows for access to the SD Card from the assembled enclosure.
  • Rugged industrial enclosure kit
  • Micro HDMI Pi4 extender board
  • Rear panel is made from 3mm acrylic
  • Allows for access to the SD Card from the assembled enclosure

應用

Computer Hardware, Education, Hobby & Education, Consumer Electronics, Industrial, IIoT (Industrial Internet of Things), Domestic, Public, Automotive Systems

內容

1x Extender Board; 1x Carrier Plate; x1 E-Case B Extrusion; 1x Aluminium End Plate; 1x Acrylic End Plate (For WiFi & Bluetooth); 1 set of Screws & Fixings; Pi-Box Pro 4 heatsink kit also includes: Heat Blocks, Heat Transfer Pads & Screws

註腳

Heat Sinking Kit consists of 2 aluminium blocks and adhesive pads that transfer the heat from the processor and the Ram chip to the aluminium carrier plate and then out to the enclosure, making the whole assembly a heat sink.
暢銷品

280 有存貨 需要更多?

280 UK 有庫存,可在 3-4 個工作日內發貨

NT$2,235.64

不提供定價。 請聯絡客戶服務

價格
每個
多項: 1 最少: 1
數量 價格 您的價格
 
 
1+ NT$2,235.64
促銷價格
合約價格
網路專用價格
網路專用合約價格
 
10+ NT$2,117.19
促銷價格
合約價格
網路專用價格
網路專用合約價格
 
25+ NT$1,989.92
促銷價格
合約價格
網路專用價格
網路專用合約價格
 
 
 

不提供定價。 請聯絡客戶服務

No longer stocked:: No Longer Manufactured::
新增至購物車 新增至購物車 預購
新增
限制的項目
新增零件編號/ 品項附註
總價:
總價: ( )
總價: --