FRDM-K82F

FRDM-K82F is a low-cost development platform for Kinetis K82, K81, and K80 MCUs. Peripherals enable rapid prototyping, including a six-axis digital accelerometer and magnetometer to create full eCompass capabilities, a tri-coloured LED and two user push-buttons for direct interaction, 2x32Mb QuadSPI external flash, FlexIO camera header, touchpads and headers for use with Bluetooth® and 2.4 GHz radio add-on modules. The OpenSDAv2.1, the NXP open source hardware embedded serial and debug adapter running an open source bootloader, offers options for serial communication, flash programming and run-control debugging. The FRDM-K22F is enabled by the Arm® Mbed™ OS platform and supported by Zephyr™ OS, for developing the Internet of Things with a free, open-source operating system.

• Form-factor compatible with the Arduino® Rev3 pin layout
• Kinetis MK82FN256VLL15 MCUArm® Cortex®-M4, 150MHz, 256kB SRAM, USB, advanced security
• Kinetis K20DX128VFM5 MCU-based OpenSDA circuit
• Dual independent voltage domains: VDD and VDDIO-E
• Flexible power supply option OpenSDAv2.1 USB, Kinetis K82 USB, and external source
• USB support onboard with micro USB cable
• Easy access to MCU input/output through Arduino® Rev3 compatible I/O connectors
• Two 32Mbit (4MB) dual onboard QuadSPI memory at 1.8V
• FlexIO header compatible with OV7670 camera, FFXOS8700CQ accelerometer and magnetometer
• Virtual serial port interface, Mass storage device (MSD) flash programming interface

內容

Arduino® FRDM-K82F hardware, Arduino® Quick Reference Card, Arduino® USB A to Micro B cable.

附註

Before plugging in the USB board, the latest OSJTAG drivers must be downloaded and installed from PEMicro OSBDM.