您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。
產品未必與您的搜尋完全相符
您先前購買過這項產品。
檢視歷史記錄
MC13213
TRANSCEIVER, LOW POWER, 2.4GHZ, SMD
產品總覽
The MC13213 is a 2.4GHz Low Power Transceiver for the IEEE® 802.15.4 standard plus microcontroller. The MC1321x family is Freescale's second-generation ZigBee platform which incorporates a low power 2.4GHz radio frequency transceiver and an 8-bit microcontroller. The MC1321x solution can be used for wireless applications from simple proprietary point-to-point connectivity to a complete ZigBee mesh network. The MC1321x contains an RF transceiver which is an 802.15.4 Standard compliant radio that operates in the 2.4GHz ISM frequency band. The transceiver includes a low noise amplifier, 1mW nominal output power, PA with internal voltage controlled oscillator (VCO), integrated transmit/receive switch, on-board power supply regulation and full spread-spectrum encoding and decoding. The MC1321x also contains a microcontroller based on the HCS08 family of microcontroller units (MCU), specifically the HCS08 Version A and can provide up to 60kB of flash memory and 4kB of RAM.
- 40MHz HCS08 low-voltage/-power core
- 60kB Flash and 4kB RAM memory
- Seven addressing modes for CPU
- Multiple 16-bit Timers
- Low external component count
- Requires a single 16MHz crystal
- Programmable frequency clock output for MCU
- Up to 38 GPIO
- 8-bit port Keyboard interrupt (KBI)
- 8-channel 10-bit ADC
- Two independent serial communication interfaces (SCI) supporting up to 115.2kBaud
- Inter-integrated circuit (I²C) with 100kbps maximum bus loading
- Internal clock generator (ICG) at 100kHz or 16MHz (including internal reference generator)
- Low-voltage detection
- In-circuit debug and flash programming available via on-chip background debug module (BDM)
- Programmable low voltage interrupt (LVI)
- Common on-chip processor (COP) watchdog timer
- Receive sensitivity of -92dBm (typical) at 1% PER
- Integrated transmit/receive switch
- Supports single-ended or full differential operation
應用
RF Communications, Automation & Process Control, Lighting, Industrial
產品訊息
技術文件 (2)
CAD 下載
--請選擇...
✔
--請選擇...
×
條款與條件
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
篩選工具