您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。

產品未必與您的搜尋完全相符

您先前購買過這項產品。 檢視歷史記錄

 
 

PICOSCOPE 4444 STANDARD KIT

PC USB Oscilloscope, PicoScope 4000 Series, 4 Channel, 20 MHz, 50 MSPS, 256 Mpts, 17.5 ns

圖片僅供舉例說明。 請參閱產品描述。

製造商產品編號:
PICOSCOPE 4444 STANDARD KIT
訂購代碼:
2748593
產品範圍
PicoScope 4000 Series
其他名稱:
PQ073
查看所有技術文件

產品訊息

想要查看類似產品?只要選擇以下所需屬性並按下按鈕即可 ×


:
PicoScope 4000 Series

:
4 Channel

:
20MHz

:
50MSPS

:
256 Mpts

:
17.5ns

:
PicoScope 4444 STANDARD KIT, Differential Osc With 3 PicoConnect 441 1:1 Differential Voltage Probes & One TA271 D9-BNC Adaptor

:
-

:
-

尋找類似產品 選擇並修改上方屬性,尋找類似的產品。

技術文件 (2)

產品總覽

Most oscilloscopes employ grounded BNC inputs where the shell is tied directly to ground, which means that expensive Active Differential Probes are required for floating or differential measurements that are not referenced to ground. The new PicoScope 4444 High Resolution, Differential Input Oscilloscope, allows the use of inexpensive Passive Differential Probes where floating or differential signals are encountered. Two kits provide a choice of differential probes for either low level voltages or up to 1000V CAT III, for easy connection to floating voltages or differential signals, plus a choice of current probes for power measurements. 12 & 14 bit digitizers with vertical zoom allow visualization of very low level signals. Serial bus decoders, makes for easy decode of differential busses such as CAN FD and RS422/485. With its small size and all the features that PicoScope software provides, it make a great general purpose scope for the bench or the field.
  • 4 fully differential high-impedance inputs
  • 20 MHz bandwidth
  • Flexible 12 and 14-bit resolution
  • Maximum input range at full scale is ±50V (±1000V using the PicoConnect 442 1000V CAT III probe)
  • Maximum common-mode range is also ±50V (also ±1000V with the PicoConnect 442 probe)
  • 256 MS deep memory
  • Rejects common mode noise
  • Interface for intelligent probes and clamps
  • Low-voltage probe for sub-millivolts to 50 V
  • 1000V CAT III probe for high voltage applications
  • Serial Bus Decodes (E.g. I2C, SPI, RS232/422/485, CAN/FD, ModBus)

應用

Test & Measurement

內容

High-resolution differential oscilloscope, 3x PicoConnect 441 1:1 passive differential voltage probes and TA271 single-ended D9-BNC adaptor

註腳

Software and user manuals available from: https://www.picotech.com/downloads. In addition, we offer calibration services for this product. Choose from a Standard Certificated Service or an internationally recognised UKAS accredited calibration. Visit our calibration service page for more details.

其他名稱

PQ073
暢銷品

5 有存貨 需要更多?

1 件可在 1 - 2 個工作日內出貨
4 件可在 3 - 4 個工作日內出貨

NT$48,150.74

不提供定價。 請聯絡客戶服務

價格
每個
多項: 1 最少: 1
數量 價格 您的價格
 
 
1+ NT$48,150.74
促銷價格
合約價格
網路專用價格
網路專用合約價格
 
 
 

不提供定價。 請聯絡客戶服務

No longer stocked:: No Longer Manufactured::
新增至購物車 新增至購物車 預購
新增
限制的項目
新增零件編號/ 品項附註
總價:
總價: ( )
總價: --