X9C503SIZT1

X9C503SIZT1 is a XDCP™ digitally controlled (XDCP) potentiometer. The device consists of a resistor array, wiper switches, a control section, and non-volatile memory. The wiper position is controlled by a three-wire composed of 99 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS (active high), U/D (active high), and INC (active high) inputs. The position of the wiper can be stored in non-volatile memory and then be recalled upon a subsequent power-up operation. The device can be used as a three-terminal potentiometer or as a two-terminal variable resistor in a wide variety of applications ranging from control to signal processing to parameter adjustment.

• 50Kohm RTOTAL
• Solid state potentiometer, three-wire serial interface
• 100 wiper tap points
• Wiper position stored in non-volatile memory and recalled on power-up
• 99 resistive elements, temperature compensated
• End-to-end resistance is ±20%, terminal voltages is ±5V
• Low power CMOS, 5V VCC, 3mA maximum active current
• 750µA maximum standby current, endurance, 100,000 data changes per bit
• Register data retention, 100 years
• 8 lead SOIC package, operating temperature range from -40°C to +85°C

警告

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.