5.17.01 FLASHER PRO
Programmer, Flasher Pro, JTAG/SWD, Ethernet, Production Programmer, 128MB Memory
- Programming tool for ARM, Renesas RX and NXP PowerPC based series of microcontrollers
- Supports stand-alone programming (without need of a PC) of internal and external flash memory
- JTAG and SWD are supported
- No power supply required, powered through USB
- Flash programming speed (depending on target hardware) in between 30-300Kbytes/ second
Flasher PRO, 20 pin 0.1" ribbon cable, Ethernet cable, USB cable, RS232 cable (1:1).
- RL78, RX
- ARM, Power Architecture, RL78, RX
- ARM7/9/11, Cortex-A5/A8/A9/R4/R5/M0/M0+/M1/M3/M4, e200z0
- Flasher PRO, 20-pin 0.1" Ribbon Cable, Ethernet Cable, RS232 Cable, USB Cable
- Supports Internal/External Flash Devices, Stand Alone JTAG/SWD Programmer, Powered Through USB
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
即日起您可預購補貨 僅需如常訂購所需數量然後結帳即可。目前可發貨的數量會列入補貨預購，供應商一旦到貨，我們便隨即出貨給您。 產品發貨給您時，才向您收費。