11100.0-02

11100.0-02 is a KTO 111 thermostat switch. It is a two state regulator for use up to 5,000 meters in altitude, thanks to optimized air gap and increased creepage distance. By use of push-in terminals, the thermostat is wired tool-free. The push-in terminals provide constant pressure on the wires to prevent them from coming loose (e.g. during transport). It is normally closed for regulating heaters. The contact opens when the temperature is rising. Approvals are VDE, UL File No. E164102, EAC.

• 3A/2A switching current (250VAC/120VAC), 30W max capacity
• Setting range from +20 to +80°C
• 7K (±4K tolerance) switch temperature difference, thermostatic bimetal sensor element
• Snap-action contact type, 100,000 cycles verified service life
• Max. operating voltage is 250VAC, frequency range from 50 to 60Hz
• AC 16A for 10s max. inrush current, clip for 35 mm DIN rail, EN 60715 mounting
• 2 Push-In clamps/rigid wire 2.5mm² (AWG 14)/stranded wire 1.5mm² (AWG 16) connection
• Plastic according to UL94 V-0, light grey casing, variable fitting position
• IP20 / II protection type/protection class
• Dimension is 60 x 33 x 41mm, operating temperature range from -45 to +80°C