STM32F302C6T6

STM32F302C6T6 is a STM32F3 series, mainstream mixed signals microcontroller (MCU) from the STM32F302 family. It incorporates the high-performance ARM Cortex-M4 32-bit RISC core operating at a frequency of up to 72MHz and embedding a floating point unit (FPU), high-speed embedded memories and an extensive range of enhanced I/Os and peripherals connected to dual APB buses. The device offer a fast 12-bit 11 channel ADC, three comparators, an operational amplifier, 20 normal I/Os (TC, TTa) and 17 5V tolerant I/Os (FT, FT1), up to 17 capacitive sensing channels, one DAC channel, a low-power RTC, one general-purpose 32-bit timer, one timer dedicated to motor control and up to three general-purpose 16-bit timers and one timer to drive the DAC, as well as standard and advanced communication interfaces - three I²Cs, two SPIs, two I²S, three USARTs, a CAN and an USB FS device.

• ARM Cortex-M4 CPU with FPU, single-cycle multiplication and HW division, DSP instruction
• 32Kbytes of flash memory and 16Kbytes of SRAM on data bus
• 2 to 3.6V VDD, VDDA voltage, POR/PDR, PVD and VBAT supply for RTC and backup registers
• 4 to 32MHz crystal oscillator, 32kHz oscillator for RTC w/ calibration, internal 40kHz oscillator
• Interconnect matrix
• Calendar RTC with alarm, periodic wakeup from stop/standby
• Serial wire debug (SWD), JTAG
• 96-bit unique ID
• Industrial temperature range from -40 to 85°C, 48 pin LQFP package
• CRC calculation unit