X-NUCLEO-DRP1M1

X-NUCLEO-USBDRPM1 is an expansion board for the NUCLEO-G071RB development board or any STM32 Nucleo development board equipped with a USB Type-C peripheral. T. It provides a straightforward means for evaluating USB Type-C Power Delivery in Sink mode based on TCPP03-M20. The USB Type-C connector can supply the STM32 Nucleo development board thanks to a 3.3V LDO.

• 100W programmable power supply (PPS) support
• USB Type-C reversible connector
• 6 V overvoltage protection (OVP) on CC lines against short-to-VBUS when the connector is unplugged
• Up to 22 V adjustable overvoltage protection (OVP) on VBUS line against charger failure
• Surge protection and system-level ESD protection on VBUS
• Common-mode filter and ESD protection on USB 2.0 High Speed data-lines
• System-level ESD protection on CC lines as per IEC61000-4-2 level 4 (±8 kV contact discharge)
• Low power mode for battery operation allows zero current consumption when no cable is attached
• Integrated dead battery management for fully depleted battery devices
• Overtemperature protection (OTP)