您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。

產品未必與您的搜尋完全相符

您先前購買過這項產品。 檢視歷史記錄

 
 

TPA-BNC

Test Accessory, TekVPI Interface Adapter

TEKTRONIX TPA-BNC
TEKTRONIX TPA-BNC
360°
×

圖片僅供舉例說明。 請參閱產品描述。

製造商產品編號:
TPA-BNC
訂購代碼:
1856721
產品範圍
TPA-BNC
技術資料表:
TPA-BNC   Datasheet
查看所有技術文件

產品訊息

想要查看類似產品?只要選擇以下所需屬性並按下按鈕即可 ×


:
TekVPI Interface Adapter

:
DPO2000, MSO2000, DPO3000, MSO3000, MDO4000, DPO4000, MSO4000

:
-

尋找類似產品 選擇並修改上方屬性,尋找類似的產品。

技術文件 (1)

CAD 下載

×

條款與條件

CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.

接受 取消

產品總覽

The TPA-BNC is a TekVPI™ Interface Adapter enables existing TekProbe® products to connect to oscilloscopes with the TekVPI™ probe interface. The TPA-BNC adapter recognises and supplies the necessary power and serial communication and offset control as used by the connected TekProbe product accessory. It provides an LED probe status indicator which identifies that the probe has powered-up successfully. Existing TekProbe-BNC probe types simply plug into the TPA-BNC adapter which is then plugged directly into any channel of an oscilloscope equipped with the TekVPI probe interface. Suitable for use with DPO2000, MSO2000, DPO3000, MSO3000, MDO4000, DPO4000, MSO4000 models.
  • Easy-to-use plug-in adapter to the oscilloscope's TekVPI™ interface
  • Provides over-current and thermal overload protection for the attached TekProbe® product
  • 0°C to +50°C Operating temperature range

應用

Test & Measurement

內容

TekVPI Interface adapter, User manual (071-1689-xx).

註腳

Tektronix probe using BNC or BNC connection with a 1-analog encoding pin for attenuation factor detection connect directly to oscilloscope's TekVPI probe interface & do not require a TPA-BNC adapter.
暢銷品

8 有存貨 需要更多?

8 UK 有庫存,可在 3-4 個工作日內交貨

NT$22,961.19

不提供定價。 請聯絡客戶服務

價格
每個
多項: 1 最少: 1
數量 價格 您的價格
 
 
1+ NT$22,961.19
促銷價格
合約價格
網路專用價格
網路專用合約價格
 
 
 

不提供定價。 請聯絡客戶服務

No longer stocked:: No Longer Manufactured::
新增至購物車 新增至購物車 預購
新增
限制的項目
新增零件編號/ 品項附註
總價:
總價: ( )
總價: --