您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。

產品未必與您的搜尋完全相符

您先前購買過這項產品。 檢視歷史記錄

 
 

EAP-E-PA

MODULE, ETRX2-PA, ENET ACCESS POINT

TELEGESIS EAP-E-PA
TELEGESIS EAP-E-PA
360°
×

圖片僅供舉例說明。 請參閱產品描述。

製造商產品編號:
EAP-E-PA
訂購代碼:
1606672
技術資料表:
EAP-E-PA   Datasheet
查看所有技術文件

產品總覽

EAP-E-PA is an Ethernet access point, it allows access to an ETRX2-PA wireless mesh networking module via Ethernet using the Lantronix XPort Direct serial to Ethernet bridge device. The Ethernet Access Point is a "gateway" allowing access to ETRX2 mesh networking modules via an industry standard Ethernet IP Network. Once the IP address of the EAP has been established and Firewall access set, the EAP can be accessed from anywhere in the world. The Telegesis AT-Command interface - based on the EmberZNet meshing stack can be easily accessed by the application software using telnet or by creating a virtual COM port using the supported Lantronix CPR (COM Port Redirector) software for windows. Using the Ember bootloader custom firmware and firmware upgrades can be downloaded via Ethernet or over the air. The SIF interface also allows the EAP-E to be used as a platform for firmware development and debugging.
  • Combines a Telegesis ETRX2 module with a incorporates a lantronix serial to Ethernet bridge
  • Complete TCP/IP protocol stack and Windows deployment software
  • Interface to Ethernet 10Base-T or 100Base-TX (auto-sensing)
  • Protocols: TCP/IP, UDP/IP, ARP, ICMP, TFTP, Telnet, Auto IP, DHCP
  • Link and activity indicator (LED)
  • Management: Telnet and Microsoft windows-based utility for configuration
  • AT Style command interpreter
  • Integrated 2.4GHz antenna
  • SIF interface for Custom application development and real time debugging of custom firmware

應用

Wireless, Building Automation

產品訊息

想要查看類似產品?只要選擇以下所需屬性並按下按鈕即可 ×


:
-

:
Ethernet

:
-

:
-

:
-

:
-

尋找類似產品 選擇並修改上方屬性,尋找類似的產品。

技術文件 (1)

CAD 下載

×

條款與條件

CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.

接受 取消

无库存

NT$5,298.02

不提供定價。 請聯絡客戶服務

價格
每個
多項: 1 最少: 1
數量 價格 您的價格
 
 
1+ NT$5,298.02
促銷價格
合約價格
網路專用價格
網路專用合約價格
 
 
 

不提供定價。 請聯絡客戶服務

No longer stocked:: No Longer Manufactured::
新增至購物車 新增至購物車 預購
新增
限制的項目
新增零件編號/ 品項附註
總價:
總價: ( )
總價: --