01551103

01551103 is a Dahlia carrier board V1.1D for the Verdin family of System-on-Modules (SoMs) / Computer on Modules (CoMs). Dahlia provides access to some of the most important features supported by the Verdin family. The majority of standard interfaces supported by the Verdin modules are exposed on the Dahlia Carrier Board through a combination of real-world connectors, card slots, and 2.54mm pitch pin headers.

• 2x USB 3.x Host ports (with USB Type-A connectors) through the on-board USB hub
• 1x USB 2.0 Dual-Role-Port(with a USB-C CONN), 1x HDMI port (with Type A CONN), battery holder
• 1x USB 2.0 debug port for connecting multipurpose USB to serial converter based on FT4232HL IC
• 1x USB power input (with USB-C CONN), 1x PCIe port (with Mini PCIe CONN), nano-SIM card holder
• 1x Ethernet port (with an RJ45 connector) featuring a 10/100/1000 Mbps interface
• 2x low-speed 2.54mm pitch male extension headers, 1x MIPI® CSI Camera Interface (with an FFC CONN)
• 1x MIPI DSI display interface, 1x 4-bit SD® card port, 1x I2C 2Kb EEPROM IC, 8x GPIOs
• Undervoltage, overvoltage, overcurrent, and reverse voltage protected power input
• 4x I2C, 1x SPI, 3x PWM, 4x ADC inputs, 1x CAN interface supporting CAN FD up to 8Mbps
• Power input either from a barrel CONN or from a dedicated USB-C CONN and Nano-ITX board size