2716-106

The 2716-106 from Wago is a gray colour, 6 pole CAGE CLAMP PCB terminal block with operating lever. It is a high current PCB terminal strip with lever-actuated CAGE CLAMP. This PCB terminal block is compatible to high current, screw-type PCB terminal blocks. It has CCA, CSA, KEMA and cURus (Underwriters Laboratories Inc) approvals.

• 320V rated voltage (III/3), 4KV rated impulse voltage (III/3) and 76A rated current
• Pin spacing is 10mm, four solder pins per contact point for high mechanical stability
• 1.5mm² to 16mm² (16AWG to 6AWG) solid conductors (tool operated termination)
• 1.5mm² to 16mm² (16AWG to 6AWG) fine stranded (tool operated termination)
• Strip length is 12mm to 13mm
• Conductor entry angle is 30° to PCB
• Solder pin length/width is 4.5mm / 0.95mm x 1.2mm
• Insulating material is polyamide 66 (PA 66), flammability rating per UL 94 V0
• Clamping spring material is chrome nickel spring steel (CrNi)
• Contact material electrolytic copper (Ecu) and contact plating is tin

應用

Industrial