CGD12HBXMP

CGD12HBXMP is an evaluation gate driver tool optimized for the XM3 module platform. The CGD12HBXMP is a form-factor-fitting, two-channel gate driver for the XM3 power module platform. Each of the two gate drive channels is protected against over-current and reverse polarity. The on-board 2W isolated power supplies support 80kHz switching frequency. Typical applications include motor and traction drives, UPS, EV chargers, industrial automation & testing, power supplies.

• Optimized for Wolfspeed’s high-performance XM3 SiC half bridge power modules
• DC bus voltage up to 1000V
• On-board 2W isolated power supplies supporting 80kHz switching frequency
• User-configurable turn-on and turn-off gate resistors enabling switching loss optimization
• Primary OVLO and UVLO with hysteresis
• On-board overcurrent; shoot-through prevention; and reverse polarity protection
• Differential inputs for increased noise immunity
• Very low isolation capacitance (less than 5pF) and 100kV/μs common-mode transient immunity (CMTI)
• Fault and power indicator LEDs for instant visual feedback
• Supply voltage range from 10.2V to 13.2V