LTC2755BCUP-16#PBF

LTC2755BCUP-16#PBF is a quad 16bit multiplying parallel-input, current-output DAC. This DAC operates from a single 2.7V to 5.5V supply and are all guaranteed monotonic over temperature. The LTC2755A-16 provides 16bit performance (±1LSB INL and DNL) over temperature without any adjustments. This SoftSpan™ DAC offers six output ranges two unipolar and four bipolar that can be programmed through the parallel interface, or pinstrapped for operation in a single range. This LTC2755 DAC uses a bidirectional input/output parallel interface that allows readback of any internal register, including the DAC output span settings. A power-on reset circuit resets the DAC outputs to 0V when power is initially applied. A logic low on the CLR pin asynchronously clears the DACs to 0V in any output range. Applications include high-resolution offset and gain adjustment, process control and industrial automation, automatic test equipment, and data acquisition systems.

• Guaranteed monotonic over temperature, 2.7V to 5.5V single supply operation
• Parallel interface with readback of all registers, power-on reset to 0V
• Asynchronous active-low CLR pin clears DAC outputs to 0V in any output range
• Differential nonlinearity is ±0.2LSB typical
• Integral nonlinearity is ±0.4LSB typical
• Gain error temperature coefficient is ±0.6ppm/°C typical
• Output settling time is 2μs typ at (0V to 10V range, 10V step. To ±0.0015% FS)
• Total harmonic distortion is -110dB typical at (multiplying, TA = 25°C)
• Output noise voltage density is 13nV/√Hz typical at (IOUT1, TA = 25°C)
• Operating temperature range from 0°C to 70°C, 64-lead plastic QFN

附註

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party