MAX5250BCPP+

The MAX5250BCPP+ is a low power, quad, 10bit voltage output digital to analogue converter with serial interface in 20 pin DIP package. It combines four low-power, voltage output, 10bit DAC and four precision output amplifiers. In addition to the four voltage outputs, each amplifier’s negative input is also available to the user. This facilitates specific gain configurations, remote sensing and high output drive capacity. It also include software shutdown, hardware shutdown lockout, an active-low reset that clears all registers and DACs to zero, a user-programmable logic output and a serial data output. Each DAC has a double-buffered input organized as an input register followed by a DAC register. A 16bit serial word loads data into each input/DAC register. The 3 wire serial interface is compatible with SPI/QSPI and MICROWIRE. It allows the input and DAC registers to be updated independently or simultaneously with a single software command.

• Supply voltage range is 4.5V to 5.5V
• Operating temperature range from 0°C to 70°C
• Low supply current of 0.85mA normal operation and 10μA shutdown mode
• User programmable digital output
• Schmitt trigger inputs for direct optocoupler interface
• Error is ±1LSB
• TTL/CMOS logic compatible

應用

Signal Processing, Industrial

警告

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.

附註

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party