列印頁面
MAKER-FEATHER-AIOT-S3
Maker Feather AIoT S3 Kit, ESP32-S3-WROOM-1-N8R8, Xtensa LX7, Cytron Development Boards
20 有存貨
需要更多？
20 件可于 3-4 個工作日後配送(英國 件庫存)
| 數量 | 價格 |
|---|---|
| 1+ | NT$819.100 |
價格Each
最少: 1
多項: 1
NT$819.10
品項附註
僅針對此訂單新增至訂單確認、發票和出貨備註。
產品訊息
製造商CYTRON
製造商產品編號MAKER-FEATHER-AIOT-S3
訂購代碼4871663
技術資料表
Silicon ManufacturerEspressif Systems
Silicon Family NameESP32-S3
Core ArchitectureXtensa
Core Sub-ArchitectureLX7
Silicon Core NumberESP32-S3-WROOM-1-N8R8
Kit ContentsMaker Feather AIoT S3 Board ESP32-S3-WROOM-1-N8R8, 3x Grove to JST-SH (Qwiic / STEMMA QT) Cable
For Use WithCytron Development Boards
SVHCNo SVHC (05-Nov-2025)
產品總覽
MAKER-FEATHER-AIOT-S3 is a simplifying AIoT board with ESP32-S3. It supports Arduino, CircuitPython, MicroPython and Espressif IDF.
- Adafruit Feather form factor
- Single-cell LiPo connector with overcharge / over-discharge protection circuit, rechargeable via USB
- 11x status indicator LEDs for GPIOs
- 1x programmable piezo buzzer (connected to GPIO12)
- 1x reset button, 1x RGB LEDs
- 1x user programmable button (GPIO3)
- 3x maker ports, compatible with Qwiic, STEMMA QT, and Grove (via conversion cable)
- Power input voltage is 5.5V DC maximum (USB (VUSB))
- Internal pull resistor is 45kohm (pull-up (RPU), pull-down (RPD))
- Operating temperature range from -20 to 65°C
內容
Maker Feather AIoT S3 board ESP32-S3-WROOM-1-N8R8, 3x Grove to JST-SH (Qwiic / STEMMA QT) cable.
技術規格
Silicon Manufacturer
Espressif Systems
Core Architecture
Xtensa
Silicon Core Number
ESP32-S3-WROOM-1-N8R8
For Use With
Cytron Development Boards
Silicon Family Name
ESP32-S3
Core Sub-Architecture
LX7
Kit Contents
Maker Feather AIoT S3 Board ESP32-S3-WROOM-1-N8R8, 3x Grove to JST-SH (Qwiic / STEMMA QT) Cable
SVHC
No SVHC (05-Nov-2025)
技術文件 (1)
法規與環境保護
原產地：
承擔產品生產最後程序之國家原產地：Malaysia
承擔產品生產最後程序之國家
承擔產品生產最後程序之國家原產地：Malaysia
承擔產品生產最後程序之國家
關稅編號：84733080
US ECCN:5A992.c
EU ECCN:NLR
符合 RoHS 規定：待通知
符合 RoHS 鄰苯二甲酸酯類規定:待通知
SVHC:No SVHC (05-Nov-2025)
下載產品合規憑證
產品合規憑證
重量 (公斤)：.02