STEVAL-A6983CV1

STEVAL-A6983CV1 is an evaluation board based on DC-DC converter buck regulator A6983CQTR. This is an easy to use synchronous monolithic step-down regulator capable of delivering up to 3A DC to the load. The wide input voltage range makes the device suitable for a broad range of applications. The STEVAL-A6983CV1 is based on a peak current mode architecture and is packaged in a QFN16 (3 x 3mm) with internal compensation thus minimizing design complexity and size. The device is designed for applications active during car parking, so it maximizes the efficiency at the light-load with the controlled output voltage ripple. The STEVAL-A6983CV1 allows the switching frequency to be selected in the 200KHz - 2.3MHz range with optional spread spectrum for improved EMC. The EN pin provides enable/disable functionality. The typical shutdown current is 2μA when disabled. The STEVAL-A6983CV1 features Power Good open collector that monitors the FB voltage.

• AECQ100 Grade 1 qualified
• 3.5 to 38V operating input voltage
• Output voltage from 0.85V to VIN
• 3A DC output current
• 25μA operating quiescent current, 2μA shutdown current, internal soft-start
• Internal compensation network, high efficiency at light loads, high voltage VIN compatible enable
• Output overvoltage protection, output voltage sequencing, thermal protection
• Operating temperature range from -40 to +150°C for Tj
• Optional spread spectrum for improved EMC, power good
• 200 to 2.2MHz programmable switching frequency (stable with low ESR capacitor min 22µF)