您在以下反白的欄位中輸入了含有無效字元的值。 請只用有效字元修改您的選擇。
產品未必與您的搜尋完全相符
您先前購買過這項產品。
檢視歷史記錄
MTI-7-0I-T
MEMS Module, Tri-Axis Gyroscope, Tri-Axis Accelerometer, Tri-Axis Magnetometer, 2.16 V, 3.6 V
產品總覽
MTi-7 is the smallest self-contained GNSS/INS (Global Navigation Satellite System/Inertial Navigation System). It uses advanced sensor fusion algorithms developed by Xsens to synchronize inputs from module's onboard accelerometer, gyroscope and magnetometer with data from external GNSS receiver and/or barometer. The raw sensor signals are combined and processed at high data rate of 100Hz to produce real-time data stream with device's 3D position, velocity and orientation (roll, pitch, yaw). Xsens optimized strapdown algorithm (AttitudeEngine™) performs high-speed dead-reckoning calculations at 1KHz, accurately capturing high-frequency motions. Xsens' industry-leading sensor fusion algorithm provides high accuracy and sensor auto-calibration in this cost-effective module for wide range of (embedded) applications. MTi-7 is part of the MTi 1-series supported by MT software suite which includes MT manager (GUI for Windows/Linux), SDK, example codes and drivers for many platforms.
- Smallest form factor on the market
- Easy integration, low cost, robustness and strapdown integration algorithm
- IP00 IP-rating
- 2000deg/s gyroscope range, 16g accelerometer range, ±8G magnetometer range
- Operating temperature range from -40 to 85°C
- Dimensions is 12.1 x 12.1 x 2.55mm
- UART, SPI, I²C Interfaces, Xbus protocols, up to 2kHz output frequency
- Built-in-self test, sync options
- SMD, footprint compatible with JEDEC PLCC-28
- Features on-board XKF3™ sensor fusion algorithm that limits load on application processor
產品訊息
技術文件 (1)
CAD 下載
--請選擇...
✔
--請選擇...
×
條款與條件
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
暢銷品
15 有存貨 需要更多？
×
即日起您可預購補貨 僅需如常訂購所需數量然後結帳即可。目前可發貨的數量會列入補貨預購，供應商一旦到貨，我們便隨即出貨給您。 產品發貨給您時，才向您收費。
下訂即可添購更多存貨 依照供應商前置時間，預計約 2023/5/29
15 英國 有庫存，可在 3-4 個工作日內發貨
由於市場條件的影響，交貨時間僅供一般指導，可能會在短時間內發生變化
篩選工具